Brief
Bi-Directional converter for Serial ATA and Parallel ATA. This Adapter Does-it-All, SATA Hard Drive to IDE Converter or IDE Hard Drive to SATA Host Converter This is a bi-direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports 1.5GHz data rate.

Features
*Automatic Serial ATA 1.5 Gbps speed negotiation;
*With LED Indicated power;

Specification
*Serial ATA 1.0 Specification compliant
*ATA / ATAPI PIO mode 0 to 4
*ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
*ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count;
*Support Serial ATA hot-plug;
*Ultra low power consumption
*Work for both AC and DC couple between the transmitter and the receiver;
*Provide specified OOB signal detection and transmission;
*No software and drivers needed (except for Win98SE);
*Support Spread Spectrum Clocking to reduce EMI
*Support Partial/Slumber power management
*Provide adjustable TX signal amplitude and pre-emphasis level
*Slave support